OUTDOOR LIGHTS WITH MOTION SENSOR HOW TO
OUTDOOR LIGHTS WITH MOTION SENSOR MANUAL
OUTDOOR LIGHTS WITH MOTION SENSOR FULL

Or you may end up hurting yourself or worsening the condition of the light. In case of technical issues, it’s suggested not to handle it on your own. If your light is experiencing issues after a recent repair or replacement, it’s a technical issue. Maybe the wires are burnt, or the lights got fused due to a power surge. It’s because the problem could be internal. Well, if you tried all of the above solutions but haven’t found a solution, try contacting a professional. And if it doesn’t fix the issue, you can always call a technician. However, the solution to this is, resetting the system. It can be quite annoying for you and your neighbors. When this happens, it can force the light to remain in the on or off position. The most common reason behind this is usually a power surge or overload. Let’s understand why do the sensors get stuck. And this should keep the lights off, resetting the sensor.

After 5-10 seconds, turn the lights back on. When you do this, the light will stay on continuously. Turn the light on and off 5-10 times quickly. Here’s another method to reset the sensor.

Make sure it remains off for at least two minutes, and this should reset your sensor. You need to turn off the switch that is powering the sensor. In case the motion sensor is powered from a wall switch, the resetting process becomes even easier. It’s because, for old models, you need to keep the circuit breaker off for an hour or so.

OUTDOOR LIGHTS WITH MOTION SENSOR MANUAL

However, check for the instructions on the manual for your sensor. It helps in automatically resetting the sensor, thus solves the problem. Turn that off for at least 30 seconds, and then turn it back on. It’s a very simple process and doesn’t require any special tools or a technician.įind the circuit breaker that powers the outdoor lights. Merely resetting the light, in some cases, fixes the problem or ensures normal functioning. Sometimes the issue is something common, but we overlook it. So, adjust the position of the light at points to a region with optimum traffic or disturbance. Sometimes when the light points towards the ground because of getting hit by something, it may not turn on. So, the best solution is to change the position of the light to where you need it the most.Īnother issue due to positioning is the light not turning on at all. For example, if you have pointed them towards a road where traffic is unavoidable, they’ll obviously remain on. If your outdoor lights are turning on frequently, maybe the position could be the issue. If you’re unable to detect anything, read the next step. To check this, you can change the duration settings to the lowest possible time and observe. If you observe that your lights always remain on, this might be happening because even small inspects or things are repeatedly turning them on for long intervals. This setting decides the duration for which the light will remain on once it’s activated. You’ll find this setting in almost every modern-day motion lighting system. Duration Settings maybe Too HighĪnother common reason behind the lights staying on for too long is the duration settings. However, if you’re unable to find the settings, you should call a technician. You can also change the setting in such a way that it detects motion from a particular direction only. You can find that setting and reduce the sensitivity to any level lower than what it’s presently set to. Usually, this setting is available on the sensor head. And, obviously, to make it right, you need to tweak the sensitivity settings. It happens when the sensitivity is set too high. Sensitivity Settings Too Highĭoes your outdoor light turn on every night, but you cannot notice anything? Well, actual culprits might be spiders. Let’s look at each of these problems one by one and find the respective solutions. Your light might have stuck into the auto mode or may be defective. This usually happens because of the duration of sensitivity settings. If your outdoor light is not turning off, it may indicate an issue. Why the Outdoor Motion Sensor Lights Won’t Turn Off?

OUTDOOR LIGHTS WITH MOTION SENSOR HOW TO

You’ll also learn how to deal with some common complexities too. This article will help you learn how you can rest the lights and make the most of them.

You should reset the outdoor lights regularly if they stay on all the time.

This is to ensure that lights only turn on when required, not every time an insect passes through.

The level of sensitivity should be optimum.

The lights should be installed correctly in the correct position.

OUTDOOR LIGHTS WITH MOTION SENSOR FULL

To use the lights to their full capacity you need to ensure three things: – Why the Outdoor Motion Sensor Lights Won’t Turn Off?ġ.

Outdoor lights with motion sensor